Job Openings

Position

Technician, Dual Beam FIB

Nanolab Technologies is looking for a Technician for our Dual Beam group. Primary function would be TEM sample preparation of lamella. The successful candidate will work as a part of a team and be expected to rapidly gain a working knowledge of many analytical techniques. Note the work hours for this position would be required to work weekends and evenings. The successful candidate will have at least 2 years of focused experience in dual beam FIB and SEM operation, experience with TEM sample preparation, an Associate degree in relevant engineering physical science discipline and solid understanding of electron microscopy, semiconductor device physics and failure analysis (through previous work experience or course work).

Apply Now

Scientist

EAG Laboratories has a great opportunity for a highly motivated chemist who enjoys solving problems using analytical chemistry. In this role, the individual will be responsible for design experiments, applies standard and non-standard techniques, procedures and criteria to determine the composition, properties and/or structure of materials, perform sample preparation, interpret analytical data from a variety of techniques (including FT-IR, NMR, GC-MS and/or LC-MS) and write reports that are tailored to our client (layman to highly technical) which includes methodology, conclusions and supporting analytical data in a fast-paced environment under firm deadlines. Considered candidates must have a PhD or MS degree in Chemistry and 2+ years of industrial experience.

All accepted applicants must be U.S. Persons as defined by ITAR: U.S. Person is a U.S. Citizen, U.S. Permanent Resident (i.e., “Green Card Holder”), Political Asylee, or Refugee due to use of information in this role is subject to the International Traffic in Arms Regulations (ITAR).

Apply Now

Analyst

EAG Laboratories, a Eurofins company, is a global scientific services company serving clients across a vast array of technology-related industries. Through multi-disciplinary expertise in the life, materials and engineering sciences, EAG helps companies innovate and improve products, ensure quality and safety, protect intellectual property and comply with evolving global regulations. EAG employs 600+ employees in seven countries, across over 15 laboratories serving more than 4,000 clients worldwide.

EAG is looking for an Analyst to join our lab in Syracuse, NY. The candidate will perform material testing across multiple techniques and the associated data collection, analysis, and reporting.  Additionally, the candidate will be responsible for process and equipment troubleshooting.  Ideal candidate will have a BS in Science, Technology, Engineering, Mathematics, prior experience, analytical chemistry-based field,  good visual acuity and manual dexterity.

Apply Now

TEM Materials Analyst

Nanolab Technology is looking for a strong TEM Analyst who has experience operating and analyzing various materials using TEM. In this role, the individual will be responsible for:

  • Obtaining Bright Field, High resolution, diffraction patterns, dark field TEM and HAADF STEM images of samples prepared by others in the lab.
  • Organize data, prepare and deliver summary reports to customers.
  • Work with customers and team members to optimize experiments and explain results.
  • Develop TEM analysis protocols for new sample types.
Apply Now

SEM Analyst

EAG is looking for an individual to join the team to be responsible for processing/imaging SEM samples using FEI tools. The work environment is fast-paced with firm deadlines. The successful candidate will work as a part of a team and be expected to rapidly gain a working knowledge of many analytical techniques. Ideal candidate will have a AA degree in microscopy or at least 1 year of focused training in SEM operation, solid understanding of electron microscopy, semiconductor device physics and failure analysis (through previous work experience or course work), knowledge and recent hands-on experience with SEM sample preparation.

All accepted applicants must be U.S. Persons as defined by ITAR: U.S. Person is a U.S. Citizen, U.S. Permanent Resident (i.e., “Green Card Holder”), Political Asylee, or Refugee. Use of information in this role is subject to the International Traffic in Arms Regulations (ITAR).

Apply Now

Microscopy Materials Analyst

Our Materials Sciences laboratory has a great opportunity for individuals with hands on experience operating our state of the art microscopy instrumentation (Scanning Electron Microscopy (SEM), FIB/SEM, Transmission Electron Microscope (TEM) etc.) while analyzing materials ranging from synthetic biomaterials to nanotechnology. Ideal candidate will have at least an AS degree in Materials Science or related physical science field and relevant hands-on experience operating microscopy instrumentation (Scanning Electron Microscopy (SEM), FIB/SEM or Transmission Electron Microscope (TEM)).

Our evening and weekend work schedules are prefect for part-time or full-time students or even anyone who wants to avoid long commute hours, looking for individuals flexible with working evenings and weekends.

 

Apply Now

Sample Prep Technician

EAG Laboratories is seeking a Technician to join our lab in the East Windsor, NJ. This position will be responsible for supporting SIMS Scientist activities by preparing samples and equipment for analyses, including but not limited to, providing sample preparation, dicing up wafers and mounting samples for SIMS analysis. Ideal candidate should have knowledge of operating equipment such as profilometers, microscopes, and sustain shop cleanliness, have either a High school diploma, an Associate or Bachelor degree plus 1+ years of experience with routine wet chemistry etching, a basic understanding of chemical safety, have manual dexterity, able to work with in a lab environment and comfortable using chemicals used for wafer etching.

Apply Now

Equipment Electrical Service Engineer

EAG Laboratories is looking for an Engineer with a BSEE who will be responsible for the repair and maintenance of EAG’s analytical instruments and ancillary equipment located at the Sunnyvale, California lab. The ideal individual must have at least three years of experience with circuit design, board design, component level troubleshooting for equipment or instrumentation.

This position could require periodic travel to other EAG laboratories to include Minneapolis, Shanghai, Taiwan, Sunnyvale, El Segundo and occasional travel to other sites.

The individual should have an AS degree in electronics, electrical engineering with 5+ years experience troubleshooting equipment or instrumentation or BSEE with 2+ years of experience troubleshooting equipment or instrumentation and repairing high voltage circuitry, high vacuum systems, analog/digital circuitry, electro-mechanical assemblies, and related systems.  Experience with Cameca and Physical Electronics systems a plus.

 

Apply Now

Production Operator (6 month contract)

EAG Laboratories, with 17 locations and 600 employees is a global scientific services company seeking is production operators to join our team on a temporary basis located in Santa Clara, CA. The production operators will be responsible for operating automated test equipment (ATE) to test semiconductor parts/components. Note this position will require availability to work during the weekend.  Day Shift: Thursday – Monday, 8:00am – 4:30pm and Graveyard Shift: Friday – Tuesday, 11:30pm – 8:00am. Ideal candidate has 1 year experience with IC testing (aka ATE test) in electronic manufacturing.

Apply Now

SEM Analyst

We are looking for a SEM Technician to join our Scanning Electron Microscopy (SEM) engineering team located at our Nanolab Technologies location. Job functions include Scanning Electron Microscopy (SEM) Imaging, sample prep cross-sectioning, microcleaving. The individual will work closely with tool vendors to understand tool performance and develop new techniques to improve throughput, perform basic tool maintenance and calibration, communicate with customers and prepare PowerPoint reports. The work environment is fast-paced with firm deadlines. The successful candidate will work as a part of a team and be expected to rapidly gain a working knowledge of many analytical techniques. Local candidates are encouraged to apply. Must be flexible to work evening and weekend.

Apply Now

Manager

EAG Laboratories has a great opportunity for a results driven leader to manage the coordination of activities of our new service line with responsibility for results in terms of costs, methods and employees. Provides supervision to analysts, including performance reviews and quarterly evaluations for bonuses. Oversees training of new analysts.  Develops customer relationships to expand range of services provided and to maintain high levels of customer satisfaction.  Interacts with peers and internal support personnel to coordinate work.

Considered candidates should have a PhD or MS degree in Chemistry, 4+ Years of experience of supervisory or management experience, excellent written communication skills, must be a proficient communicator and listener, able to handle multiple functions at the same time and maintain good organizational skills and relative business experience, a plus

Apply Now

Marketing Intern

We are looking for an enthusiastic and creative marketing intern to assist our marketing department for up to 20 hours per week. As a marketing intern, you will collaborate with our marketing and talent acquisition teams in updating the company websites and company career pages on social media platforms. This is a great opportunity to be part of a major focus in supporting our “Internal Marketing” plan to increase branding awareness to our staff, as well as potential job candidates through various recruiting channels.

We are considering candidates that are pursuing BA/BS in Journalism, Communications, Digital Media Art, or English, demonstrate a strong desire to learn along with professional drive, excellent verbal and written communication skills and working knowledge of MS Office, Adobe Creative Suite (Illustrator, Photoshop and InDesign) and WordPress is highly desirable.

Apply Now

Senior Metallurgist

We have an opportunity for a Senior Consulting Metallurgist to work on industrial failure analysis and for expert witness support in litigation cases relating to product liability and patent infringement. We work with automotive, aerospace, heavy equipment, maritime, consumer products and medical device industries. In this role, you will be involved in developing and supervising the failure analysis test methods and procedures, defining protocols, and investigating the root cause of product failures. This role is at the forefront of providing scientific expertise and data interpretation for industrial failures and expert testimony in legal cases.

The ideal candidate will have a broad understanding of metallurgy and advanced failure analysis techniques, and provide expertise relating to metals, polymers, composites and ceramics. Experience in performing root cause failure analysis in areas such as corrosion/oxidation, stress corrosion cracking, fatigue and other cracking mechanisms, contamination problems, wear failures, adhesion and bonding problems, improper heat treatments and plating issues is required. Join our team of outstanding, respected industry leading specialists providing analytical integrity, accurate testing, data interpretations and expert testimony.

Apply Now

To enable certain features and improve your experience with us, this site stores cookies on your computer. Please click Continue to provide your authorization and permanently remove this message.

To find out more, please see our privacy policy.