Pharmaceutical & Biopharmaceutical Development Services
EAG brings unparalleled expertise to the development and commercialization of small molecule drugs, biopharmaceuticals, antibody-drug conjugates (ADCs), drug-device combination…
EAG brings unparalleled expertise to the development and commercialization of small molecule drugs, biopharmaceuticals, antibody-drug conjugates (ADCs), drug-device combination products and other therapies. From designing IND-enabling studies to delivering full CMC analytical and QC support, we join your R&D team as a true partner. EAG scientists take time to understand both your commercial goals and the unique characteristics of your compound. We provide expert guidance to balance regulatory expectations with expediency and cost, and approach technical challenges with flexibility and resolve.
When it comes to understanding the physical structure, chemical properties and composition of materials, no scientific services company offers the breadth of experience, diversity…
When it comes to understanding the physical structure, chemical properties and composition of materials, no scientific services company offers the breadth of experience, diversity of analytical techniques of technical ingenuity of EAG. From polymers to composites, thin films to superalloys—we know how to leverage materials sciences to gain a competitive edge. At EAG, we don’t just perform testing, we drive commercial success—through thoughtfully designed investigations, technically superior analyses and expert interpretation of data.
Having helped develop the test methods that shape current regulatory guidelines, EAG chemists, biologists and toxicologists have evaluated the environmental impact of thousands of…
Having helped develop the test methods that shape current regulatory guidelines, EAG chemists, biologists and toxicologists have evaluated the environmental impact of thousands of active ingredients and formulations—from pesticides and pharmaceuticals to industrial chemicals and consumer products. Whether you are exploring “what if” scenarios, registering a new active ingredient or formulation, responding to a data call-in or seeking to understand the latest guidance, turn to EAG for technical excellence, sound advice, GLP-compliant study execution and expert interpretation.
Whether connecting the internet of things, guiding surgical lasers or powering the latest smart phone, integrated circuits and microelectronics touch nearly every aspect of human…
Whether connecting the internet of things, guiding surgical lasers or powering the latest smart phone, integrated circuits and microelectronics touch nearly every aspect of human life. In the world of technology, innovation and continuous improvement are imperatives—and being able to quickly and reliably test, debug, diagnose failures and take corrective action can make the difference between a doomed product launch and building a successful global brand. EAG offers you the world’s largest and most diverse collection of specialized analytical instrumentation, capacity to perform a variety of microelectronic tests in parallel, and the multi-disciplinary expertise required to draw true insight from data.
No contract service provider has more experience performing custom synthesis and producing isotopically labeled compounds to support product development in life science, chemical…
No contract service provider has more experience performing custom synthesis and producing isotopically labeled compounds to support product development in life science, chemical and related industries than we do. From 14C and 3H radiolabeled clinical trial materials synthesized under cGMP, to stable-labeled active ingredients for metabolism and environmental fate/effects testing, turn to EAG. We have extensive experience with multi-step and other complex synthesis projects, and our comprehensive, in-house analytical services ensure quick turnaround of purity and structural confirmation.
EAG combines biotechnology and protein characterization expertise with more than 50 years' experience analyzing chemical compounds in plant and environmental matrices to address…
EAG combines biotechnology and protein characterization expertise with more than 50 years’ experience analyzing chemical compounds in plant and environmental matrices to address the growing needs of the biotechnology crop industry. We offer a wide range of techniques required to fully characterize the event insertion and expressed proteins, as well as the various studies required to confirm the food, feed and environmental safety of products that represent the trait. From early-stage protein confirmation to GLP-compliant EDSP and allergenicity testing, we help you make faster, more informed development decisions and comply with evolving global regulations of genetically engineered crops.
When you need solid science and investigative engineering to address product failures, inform legal strategy, protect intellectual property or address product liability disputes,…
When you need solid science and investigative engineering to address product failures, inform legal strategy, protect intellectual property or address product liability disputes, turn to EAG. We’ve provided technical consulting, analysis and expert testimony for hundreds of cases involving the aerospace, transportation, medical device, electronics, industrial and consumer product industries. Our team of experts understands the legal process and your need for responsiveness, effective communication, scientifically defensible opinion and confidentiality. From professional consulting to data review to trial preparation and expert witness testimony, ask EAG.
Using an array of advanced separation techniques and innovative technology, we conduct highly precise analytical chromatography for various industries. Whether you want a closer…
Using an array of advanced separation techniques and innovative technology, we conduct highly precise analytical chromatography for various industries. Whether you want a closer look at the purity of your pharmaceutical or need to better understand an agrochemical’s components, EAG has the expertise to separate and evaluate any compound.
Need to evaluate the molecular structure of a compound or identify its origins? EAG knows how. With state-of-the-art tools, we can separate, vaporize and ionize the atoms and…
Need to evaluate the molecular structure of a compound or identify its origins? EAG knows how. With state-of-the-art tools, we can separate, vaporize and ionize the atoms and molecules in almost any pure or complex material to detect and obtain mass spectra of the components. We rely on decades of experience in mass spectrometry to provide our clients with precise analyses and the best detection limits.
EAG is a world leader in high-resolution imaging down to the atomic level. We offer unmatched analytical know-how, generating extremely detailed surface and near surface images…
EAG is a world leader in high-resolution imaging down to the atomic level. We offer unmatched analytical know-how, generating extremely detailed surface and near surface images for various industries, from consumer electronics to nanotechnology. Using state-of-the-art equipment and innovative techniques, we conduct expert imaging to aid in failure analysis, dimensional analysis, process characterization, particle identification and more. If you want to investigate a material with angstrom scale resolution, you can count on EAG to get the job done quickly and precisely.
EAG offers a vast array of spectroscopic techniques to clients in various industries, from defense contractors to technology pioneers. We combine unparalleled expertise and…
EAG offers a vast array of spectroscopic techniques to clients in various industries, from defense contractors to technology pioneers. We combine unparalleled expertise and methodology with cutting-edge technology to analyze your organic, inorganic, metallic and composite materials for identification, compositional, structural and contaminant information. Whether you need expert spectroscopic analysis to improve your production process or to surmount a technical challenge, EAG is up to the task.
Need to identify your unique material? Want to analyze the thermal properties of a sample, or measure the success of a process step? If it has to be done quickly and it has to be…
Need to identify your unique material? Want to analyze the thermal properties of a sample, or measure the success of a process step? If it has to be done quickly and it has to be done right, you can count on EAG. We offer a range of adaptable techniques and innovative methods to evaluate the physical and chemical characteristics of any compound. Our highly precise testing and analytical services will improve your production process, expedite R&D and help you conquer any technical challenge.
One of the most respected names in contract research and testing, EAG Laboratories is a global scientific services company operating at the intersection of science, technology and…
One of the most respected names in contract research and testing, EAG Laboratories is a global scientific services company operating at the intersection of science, technology and business. The scientists and engineers of EAG apply multi-disciplinary expertise, advanced analytical techniques and “we know how” resolve to answer complex questions that drive commerce around the world.
Science and technology transcend industry boundaries, and so does demand for EAG’s expertise. We partner with companies across a broad spectrum of high-tech, high-impact and…
Science and technology transcend industry boundaries, and so does demand for EAG’s expertise. We partner with companies across a broad spectrum of high-tech, high-impact and highly regulated industries. We help our customers innovate new and improved products, investigate manufacturing problems, perform advanced analyses to determine safety, efficacy and regulatory compliance, and protect their brands.
EAG’s corporate culture is firmly rooted in four guiding principles: “foster a growth mindset,” “find a better way,” “earn more loyal customers,” and “win…
EAG’s corporate culture is firmly rooted in four guiding principles: “foster a growth mindset,” “find a better way,” “earn more loyal customers,” and “win together.” Across all of our 20+ locations, you will find a true passion for science and the power of science to improve the world we live in. Hear what some of our ~1200 scientists, engineers and support personnel say about what it means to be part of EAG Laboratories.
EAG is growing, and we are always looking for talented, problem-solving oriented individuals to join our company. If you have a “we know how” spirit, we want to hear from you.…
EAG is growing, and we are always looking for talented, problem-solving oriented individuals to join our company. If you have a “we know how” spirit, we want to hear from you. Browse current openings now, and re-visit our careers page often.
Developing a Phase-Appropriate Extractables and Leachables Program
By Wayland Rushing, PhD, Senior Scientific Advisor, EAG Laboratories
Until recently, the evaluation of extractables and leachables in drug products has been performed almost exclusively during late-phase development. Regulators are now increasingly requesting additional E&L data for early phase clinical trial material, especially when the products are nonstandard or lack a vendor-provided extractables package. These requests, which can put a hold on clinical trials, can be time-consuming and expensive.
Identification of the products and their attributes that are more likely to receive questions from the FDA during early phase clinical trials is possible. For these products, a streamlined E&L study design is described that helps companies answer or altogether avoid requests for early phase data. The study design helps companies to be proactive about gathering this information, builds Quality by Design (QbD) principles into the drug development pipeline and reduces the cost and time of development.
Patient safety and drug potency depend on minimizing risks posed by leachable compounds migrating from container closures, manufacturing equipment and drug delivery systems into pharmaceuticals. Over the past 20 years, E&L evaluations have evolved and taken on a larger role in the drug development process. The first drug products to require E&L studies were orally inhaled and/or nasal drug products (OINDPs), followed by parenterals, then ophthalmics and dermal products. E&L studies of manufacturing equipment have increased with the advent of single use systems (SUS), due to the presence of plastic components that replace traditional stainless steel manufacturing environment. Each of these evolutions has focused on the data required for registration of a drug (e.g. NDA, ANDA, BLA). During each of these evolutions, regulatory guidance and industry best practices have evolved that provide a framework for what is required. However, these have always been focused on what is required for final approval and none provide any information on what is or may be required during the early phases of the development process.
The FDA provides general guidance about extractables and leachables but hasn’t stipulated what needs to be measured, how to measure it or at what level extractable and leachable compounds are a safety concern. Vendors rely, instead, on industry groups for best-practices advice that they can use to support their submission for a final drug registration.
In the past five years, drug sponsors have seen a marked increase in requests from the FDA for detailed E&L data during phases 1 and 2. These requests are not only for clinical trial material including container closure systems, but also for manufacturing equipment and dosing components. Several programs were placed on clinical hold until this data is gathered, leading to delays and increased costs.
Given the expense of undertaking E&L studies and the length of time it takes to perform them, this can be an onerous burden on a drug development program. Managers in charge of the CMC portion of a regulatory filing, analytical development managers and heads of manufacturing and processing struggle with how to acquire this E&L information without significantly increasing development time and expense.
Fortunately, there are commonalities in terms of questions regulators are asking and the types of programs receiving these requests for additional E&L data. Typically, it is non-aqueous formulations, unique syringe configurations, biomedical devices and drug delivery systems that receive requests. These are more likely to require E&L studies at an early phase when they have uncommon components, proprietary packaging, the vendor has not supplied an E&L data package or components have not yet been used in an approved product.
In response to the growing call for E&L studies during early phases and the need that these evaluations be cost-effective and as brief as possible, we created a condensed experimental design to identify extractables and leachables in early phase clinical trial material. We have used it successfully many times for a variety of drug products, helping drug development teams answer or avoid regulatory requests.
Extractables: Compounds that migrate out of materials under aggressive laboratory conditions.
Leachables: Compounds that migrate into the drug product under actual conditions of usage, such as during production. Normally a subset of extractables.
Safety Concern Threshold (SCT): The level below which there is negligible risk associated with the toxicity of the compound based on dosing. It is used for leachables with unknown risks; compounds with known risks have toxicology data to refer to.
Analytical Evaluation Threshold (AET): The level at or above which a leachable or extractable needs to be reported for potential toxicological assessment. It is based on the SCT.
Primary packaging components
Secondary packaging components
Inks and dyes
REGULATIONS AND GUIDANCE
The FDA has similar requirements for container closure systems and equipment, for both small molecule drugs and biologics. To date, other than to say that companies need to perform E&L analyses, the agency has provided only limited additional guidance:
Guidance for Container Closure Systems for Packaging Human Drugs and Biologics (1999)
Reviewers Guidance for Nebulizers, Metered Dose Inhalers, Spacers and Actuators (1993)
Metered Dose Inhalers (MDI) and Dry Powder Inhalers (DPI) (1998)
Nasal Spray and Inhalers Solution, Suspension, and Spray Drug Products (2002)
Drug Products Packaged in Semipermeable Container Closure Systems (2002)
Instead, for what to measure, how to perform the studies and levels at which leachables become a safety concern, companies rely on industry best practices and CROs for advice. These include PQRI, which has best-practices documents for inhalation devices, parenterals, and ophthalmics, ICH, USP, and BPSA and BPOG, with guidance about bioprocessing equipment and SUS.
Taken together, these sources deal with the data and information required to submit a final registration for an NDA, PLA or NADA, but don’t outline the requirements that might be necessary earlier in the development process.
CLINICAL TRIAL MATERIAL: THE NEXT STEP IN E&L STUDIES
A company typically starts its E&L analysis at the end of phase 2, as the container closure system is chosen and the manufacturing process is being finalized. It then generates leachable stability data during phase 3. A thorough E&L program can take six to 18 months to generate the data necessary for registration filing. This timeline makes it challenging to do a complete E&L study during the much shorter length of phase 1 and 2 trials.
We saw the first request for E&L data for phase 1 material in 2012, for a non-aqueous formulation using a nonstandard vial/stopper configuration. Since then, we’ve worked with a large number of programs that received regulatory requests for E&L evaluations and/or data during phase 1 or, in some cases pre-IND. In some cases, the FDA stated that USP testing was insufficient for performing a risk assessment. A significant portion of these programs was placed on clinical hold pending generation of this data.
REGULATIONS FOR CLINICAL TRIAL MATERIAL
While specific regulatory requirements are vague, a Dr. Ingrid Markovic of CBER said, in a 2014 presentation, “E&L and other impurities are deemed to be controlled in the IND phase because the clinical outcomes are closely monitored; therefore, E&L studies are generally not required, unless so deemed warranted… However, from a manufacturing perspective, it is advisable to be cognizant of E&L during component and packaging selection in early development to avoid possible problems in late development.”
These comments underscore the challenge associated with performing E&L in the early phase. Typically, while it may be a good idea to generate the data to have a better understanding of potential future challenges and improve quality, it is not required for the purposes of evaluating safety “unless so deemed warranted.” The question is, what do regulatory authorities mean by “deemed warranted?”
WHICH PRODUCTS GET QUESTIONS?
Using internal data from our experience with many different drug products at various stages of development, along with information from colleagues and pharmaceutical companies, we are able to predict whether a particular product is likely to get a request from the FDA for E&L data during phase 1.
Products getting requests tend to be in the high-risk category identified in the FDA guidance document for container closure systems.2 The exception to this has been inhalation products, which tend not to get requests, possibly because of information that the manufacturer makes available to the FDA.
CATEGORY 1: PRODUCTS WITH A MATERIAL QUALIFICATION PROGRAM
Drugs that have been assessed for quality and safety through a material qualification program typically receive no requests for additional E&L data. A company’s material qualification program establishes a standardized testing protocol to assess the risks of all materials. The extraction uses as many as ten solvents, a range of pH and ionic strength, alters the organic/aqueous ratio and uses common additives such as surfactants to mimic the conditions of the process. Then they are tested with a variety of analytical methods, such as HPLC. It allows comparison of two possible components (e.g. stoppers) in terms of compatibility and leachables.
This standardized testing comes with a low risk that an unknown leachable will show up later on. It requires significant up-front time and cost to generate the data and internal resources to maintain and perform testing. As such, it is best used in companies with large development pipelines, such as those that might have a dozen vial/stopper configurations to test.
CATEGORY 2: VENDOR SUPPLIES EXTRACTABLES PACKAGE FOR A STANDARD FORMULATION
If a product was not qualified with a material qualification program, but the vendor supplies a thorough extractables profile for formulations that are standard in commercialized products, it is not likely to see a request for additional E&L data. The information that should be gathered prior to selecting material includes whether there is a DMF, whether the component has been used in a successful filing and what testing was performed on the components for release.
This is the recommended route for early phase products. Vendors should be evaluated to assess which one offers the best extractables package. If two components are equal in terms of functionality, it usually makes sense to pick the product with the better extractables package because it lowers risk. It is advisable to choose well-characterized materials. The one drawback is that there could be unknowns above the SCT.
The typical experimental design that manufacturers use to generate data requires a lot of effort. As with category 1, leachable data is not normally required as extractables are taken as worstcase leachables. If leachable studies are desirable, the vendor’s extractable methods might be available. Some CROs that do E&L testing have in-house generic screening methods that can be used. It should be kept in mind that extractable unknowns could show up as leachables, although vendor’s data should catch such ‘bad actors.’
CATEGORY 3: LACK OF EXTRACTABLES DATA FOR A NONSTANDARD FORMULATION
These products are the ones getting requests from both CBER and CDER for early phase data. While every product that received a request for additional E&L data fell into this category, not every product that falls into this category requires additional E&L evaluation. The company does not have a material qualification program, it was not supplied with an extractables package from the vendor and the product is a nonstandard formulation. Preemptive generation of early phase data can benefit a company expecting questions from the FDA or to prevent getting those questions.
CATEGORY 4: PARENTERAL DOSING DEVICES (INFUSION SETS, PUMPS, IV BAGS)
An exception to the scenarios above are infusion sets used during clinical trials. These tend to elicit requests from the agency to provide E&L data. Products that are dosed via this route during clinical trials are also at the highest risk of being placed on clinical hold if E&L risks are not addressed.
CHALLENGES OF DESIGNING AN EARLY-PHASE PROGRAM
Study designs for early phase programs need to be shortened to take into account the time, cost and resource limitations inherent in early phase trials. A thorough E&L evaluation can take 18+ months and cost as much as $100,000-500,000, which doesn’t work with the shorter length and limited budget of an early phase program. So how do we design a study that is still based on good science and focused on patient safety, while addressing the timeline and cost constraints of early phase development?
CONDENSED EARLY-PHASE E&L STUDY DESIGN
The standard, late-phase E&L study design begins with information gathering, followed by a determination of SCT/AET for materials, extractable studies and then leachable studies. We have pared this design to make it phase appropriate while still providing high-quality data that lowers risk and answers the potential questions that a company might get from the FDA. We have used this study design successfully dozens of times, especially for those products placed on clinical hold.
The first two steps are the same: gather information and set analytical level. The third step has extraction and leachables studies performed in parallel instead of in stepwise fashion.
Process for conducting an Extractables and Leachables study
Process for conducting an early-phase Extractables and Leachables study.
It allows us to analyze all of our extraction samples, along with simulation leachable samples or actual leachable samples (if the client already has some available from earlier R&D or preclinical work) to generate that data simultaneously. Then we identify potential leachables in all these samples that are above the AET. The final step is to do the toxicology evaluations on these leachables.
Extractables program: We perform asymptotic extractions as per the typical program with a minimum of three solvents, covering the polarity and pH range of the drug product. One of the solvents closely resembles the drug product placebo. We use reflux or sonication, making sure not to be too aggressive as this can produce spurious extractables unlikely to be leachables. Extractables are analyzed using HPLC, gas chromatography, ICP for metals and other techniques.
Leachables program: Early phase drug products generally have a shorter shelf life, perhaps as little as one month, and infusion sets might only be used one or two days in a clinical study. This allows us to shorten the experimental design to simulate a quicker leachables profile.
We store drug product and placebo in the container closure system to be tested under normal and accelerated conditions. Then we age or stress simultaneously, or start the leachables even before initiating extraction studies, to generate extractable samples and leachable samples that we can analyze concurrently. Additionally, we test placebos and the forced degradation of the API.
Since we’re running everything together, we perform subtractive fingerprinting between the different samples for each analytical technique. For example, we generate our HPLC profiles for the extractables and leachables in the API. We might see 40 extractable peaks, but only three of those peaks show up in the leachables. That means we don’t have to identify all 40 of the extractables because the data show that 37 don’t leach. Instead, we focus on the three that showed up in our samples.
Analytical interpretation: Data interpretation is straightforward, comparing fingerprints between the extraction and placebo samples. Use of the API and drug formulation samples allows for removal of API and drug product-related peaks. Thus, we trace back peaks in the final drug product to determine whether they came from the API, the drug product formulation or the leachables. Then we only focus on those that can be traced back to the extractables, confident that those are the actual leachables.
CASE STUDY 1: NON-AQUEOUS VIAL/STOPPER
We used this compressed experimental design to analyze a vial/stopper configuration for which the stopper was nonstandard, had no vendor-supplied extractables information and used an unusual cottonseed-oil formulation. The FDA requested E&L data prior to the clinical study, which was scheduled to be two months long.
Study design: We performed extractables on the stopper. Leachables were generated using only the placebo for two reasons: sufficient quantities of the API, which was a specialty compound, were unavailable; the API concentration in the drug product was low enough that we assumed, from a risk standpoint, that it wasn’t going to alter the leaching profile. We stored samples for two months at the normal storage temperature (5 °C) and at room temperature (25 °C) as a worst-case scenario, then analyzed the leachable samples concurrently with extractable samples and API and drug product.
Results: There was a large number of extractables, which we expected since one of the extraction solvents was cottonseed oil. Many of these were unknowns. Fingerprinting revealed only two leachables above the SCT and both correlated with known extractables. At 25 °C, four leachables were observed, of which one was an unknown compound that we identified from a library match with its gas chromatography mass spectrum. Since they were all knowns with available toxicology data, risk assessment showed that there were no safety issues.
The program took three months from beginning to the issuance of our report. The data satisfied the regulator’s request and no additional questions were posed.
CASE STUDY 2: INFUSION SET
Evaluations of drugs infused by pump in clinical studies typically focus solely on drug product compatibility, asking whether the API is sticking to polymer or whether there is loss of potency. For this early phase study in which the drug was infused by a syringe pump for less than 24 hours, however, no E&L data had been presented in the IND. The FDA had questions about the infusion sets, not the syringe pump or syringe, and put the study on clinical hold until an E&L evaluation was performed.
Study design: We performed extractions on individual components of the infusion set using the drug product and placebo. Then we dynamically generated leachables under the actual conditions of use, using the infusion pump over 24 and 48 hours at 37 °C, a temperature that mimics the state of having the equipment next to the body.
Results: Given that the infusion sets were constructed of five different polymers, multiple extractables were observed, many of which were unknowns. Fingerprinting showed that, even after 48 hours, there were no leachables above the AET, as expected given the low contact time. Risk assessment showed no safety issues even at twice the length of typical use. The study took six weeks until issuance of our report, the data was accepted and the clinical trial hold was removed.
There is growing regulatory scrutiny of extractables and leachables of clinical trial material. Extractables and leachables evaluations are now part of drug development at all stages. Fortunately, we have been able to identify the specific early phase products used in clinical trials and their particular attributes that make them more likely to face enhanced scrutiny from the FDA for E&L data.
To meet these growing requirements for phase-appropriate E&L evaluations, we have developed an abbreviated study design that is ideal for generating data in a cost-effective, time-efficient manner for early phase clinical trial material. This experimental process has the added benefit of building QbD principles into drug development from the early phases, thus lowering overall risk and ensuring patient safety. The study design helps companies answer or, in some cases, altogether avoid questions from the FDA during phases 1 and 2 that could lead to a clinical hold being placed on a study.
The two case studies presented represent the many companies for which we have successfully used this condensed plan to aid their drug development.
ABOUT THE AUTHOR
Wayland Rushing, PhD, is director of scientific affairs at EAG Laboratories. He is a technical expert in CMC program design, analytical development and regulatory submissions. Dr. Rushing is a subject matter expert in HPLC and GC method development and validation, E&L program design and regulatory submission requirements. He has drafted IND and NDA submissions and assists EAG clients in responding to FDA deficiency letters. Over his 16 years as a scientific advisor with EAG Labs, Dr. Rushing has led CMC development programs for biopharmaceuticals, including parenterals, inhalation drugs, and other medicines with complex delivery systems.