Tensiometry

Tensiometry is the measurement of interfacial tension, typically of the interface between a liquid and a solid, gas or another liquid.

EAG Laboratories performs dynamic contact angle and force tensiometry measurements using the Dataphysics DCAT21. The DCAT21 is equipped with a high precision balance and z-axis variable speed stage for reproducible measurements of the change in apparent mass of a sample when in contact with a liquid. All measurements can be performed under temperature-controlled conditions from -20ºC to 100ºC.

Liquids

Surface Tension: The surface tension of a liquid in air can be measured using the Wilhelmy plate method.

Tensiometry

Liquid-Liquid Interfacial Tension: The du Noüy ring method can be used to determine the interfacial tension between two liquids by measuring the tensile force required to breach the interface.

Density: The density of a liquid can be measured with high precision by measuring the buoyancy of a solid with well-defined geometry when it is immersed in the liquid.

Solids

Density: The density of solids can be analyzed by measuring the mass of the solid and calculating the volume by the buoyant force when the solid is immersed in a liquid of known density.

Dynamic Contact Angle: The contact angle of a liquid-solid interface can be measured by the tensile force applied while the solid is being immersed (advancing contact angle) and withdrawn (receding contact angle) from a liquid with known or measured surface tension and density. Thin films can also be measured in this manner.

Powders

Density: The density of a powder can be determined by the same measurement as the density of a solid.

Contact Angle: By treating the interstitial space of a powder as though it were a bundle of capillaries, the relationship between the contact angle and the capillary constant can be determined.

Ideal Uses of Tensiometry

  • Characterization of coatings, films, fibers and powders to investigate their hydrophobic/hydrophilic properties
  • Investigate changes in surface finish
  • Measure physical properties of materials
  • Raw materials fingerprinting
  • Sample purity determination (potentially in conjunction with other methods)
  • Quality assurance and quality control

Strengths

  • Non-destructive method
  • Surface tension can be measured in many different solvents
  • Contact angle and surface tension measurements provide information regarding fluid properties, liquid/liquid interfaces and solid-liquid interactions
  • An excellent way to characterize coatings and films; can be used on single side coated samples
  • Can be used on fibers
  • Density of liquids, solids and powders can be used to track physical properties

Limitations

  • Volume requirements:
    • For density measurements, sample requirements are 40 mL liquid and ~1 mL powder
    • For surface tension measurements, sample requirement is 20 mL
    • For contact angle measurements, requirements are: ~20 mL liquid, ~30 mL powder and ~5 mm length of solid material
  • Cannot be used on strong acids

Tensiometry Technical Specifications

  • Temperature control -20°C to 100°C

Would you like to learn more about using Tensiometry?

Contact us today for your Tensiometry needs. Please complete the form below to have an EAG expert contact you.

To enable certain features and improve your experience with us, this site stores cookies on your computer. Please click Continue to provide your authorization and permanently remove this message.

To find out more, please see our privacy policy.