Design an Effective Chemical Characterization Study for Your Device
May 15, 2024
Join us for this live online symposium presented by EAG Laboratories and Exponent!
Webinars
Subjects
UPCOMING LIVE WEBINARS
Please check back as we are continuing to add more live webinars. Below are recorded webinars from previous events:
TECHNIQUES & SERVICES WEBINARS
AES Webinar
This webinar is an introduction to Auger Electron Spectroscopy. It will include the principles of the technique with examples.
AFM & OP Webinar
This webinar will introduce you to AFM and OP, with a overview of the theory of each technique and representative examples of them in action.
APT Webinar
In this webinar we introduce Atom Probe Tomography (APT) which is a technique that provides three-dimensional (3D) chemical and spatial maps.
EBSD Webinar
This webinar will focus on Electron Backscatter Diffraction (EBSD) and Electron channeling contrast imaging (ECCI)
EDS & EELS Webinar
In this webinar we introduce Energy Dispersive X-ray Spectroscopy (EDS) and Electron Energy Loss Spectroscopy (EELS)
Electronic Device Failure Analysis Webinar
In this webinar we introduce failure analysis of ICs and other components in the product development cycle and for improving current products
Ellipsometry Webinar
In this webinar we will focus on Spectroscopic Ellipsometry (SE) which is a powerful analytical tool for the characterization of thin films.
ESD Webinar
In this webinar we introduce electrostatic discharge (ESD) testing which is one of the failure mechanisms for integrated circuit parts
FIB Circuit Edit Webinar
In this webinar we introduce FIB Circuit Edit which allows the cutting of connections and placement of new lines in a semiconductor die
FIB Webinar
In this webinar we introduce Advanced Focused Ion Beam (FIB) which provides precise cross-section imaging analysis
Fractography Webinar
In this webinar we introduce Fractography which is a failure analysis evaluation technique when components fracture
FTIR & Raman Webinar
In this webinar we will focus on Fourier transform infrared (FTIR) and Raman spectroscopies comparing the two techniques
Gas Analysis & Leak Testing Webinar
In this webinar we introduce Residual Gas Analysis (RGA), Evolved Gas Analysis (EGA), and Cumulative Helium Leak Detection (CHLD)
GC-MS Webinar
In this webinar we will focus on Gas Chromatography-Mass Spectrometry (GC-MS) which allows for the identification of specific molecules
GDMS Webinar
In the full webinar we will focus on full survey chemical analysis using solid sampling high resolution GDMS.
ICP-OES Webinar
In this webinar we will focus on Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), and ICP-MS
IGA Webinar
This webinar will focus on Instrumental Gas Analysis (IGA) that measures gas-forming elements present in solid materials.
LA-ICP-MS Webinar
This webinar is an introduction to Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry for direct elemental and isotopic analysis.
Latch-up Testing Webinar
In this webinar we introduce latch-up testing which is relevant for CMOS devices with high static power dissipation.
Metallography Webinar
In this webinar we introduce metallography which is a crucial source of valuable information in the failure analysis process
Nanoindentation Webinar
In this webinar we will focus on Nanoindentation which is a nano-mechanical test that provides the mechanical properties
PED Webinar
In this webinar we introduce Precession Electron Diffraction (PED) which has been essential to nano-scale structural analysis
Plasma FIB Webinar
In this webinar we introduce Plasma Focused Ion Beam (P-FIB) which is a instrument that combines a SEM with a plasma-based FIB.
RBS Webinar
In this webinar we will focus on Rutherford Backscattering Spectrometry (RBS) which is a thin film analysis technique
Reliability Testing Webinar
In this webinar we introduce setting up reliability test plans, processing reliability data and the relation to the lifetime of a product
SEM-CL Webinar
In this webinar we will focus on SEM Cathodoluminescence (SEM-CL) Analyses for Materials such as compound semiconductors
SEM-EDS Webinar
In this webinar we will focus on Energy Dispersive X-ray Spectroscopy (EDS) and Scanning Electron Microscopy (SEM)
SIMS Webinar
In this webinar we will focus on Dynamic Secondary Ion Mass Spectrometry which used to investigate the elemental structure of materials.
sMIM Webinar
In this webinar will be presenting information on scanning Microwave Impedance Microscopy (sMIM) operation.
Surface Analysis Webinar
In this webinar we introduce analytical techniques used by EAG for surface analysis – XPS, Auger and TOF-SIMS
TEM Webinar
In this webinar we will introduce the principles of Transmission Electron Microscopy (TEM) with a focus on real-world problem-solving.
TOF-SIMS Webinar
In this webinar we introduce TOF-SIMS which is a surface analysis technique used to investigate the extreme surfaces of samples.
Trace Analysis Webinar
In this webinar we introduce Trace Analysis of Advanced Materials by Direct Solid-Sampling and Solution-Based Techniques
TXRF Webinar
In this webinar we introduce Total Reflection X-ray Fluorescence (TXRF) which is a non-destructive elemental survey technique.
Warpage Analysis Webinar
In this webinar we introduce Warpage and Strain Characterization used for non-contact, full-field acquisition of 3D topographies.
XPS Webinar
In this webinar we introduce X-Ray Photoelectron Spectroscopy (XPS) which is a surface analysis technique.
XRD Webinar
In this webinar we introduce X-ray Diffraction (XRD) which is a analytical technique for the examination of crystalline materials.
XRF Webinar
In this webinar we introduce X-ray Fluorescence Spectroscopy (XRF) which is a analytical technique used for elemental analysis of materials.
ADDITIVE MANUFACTURING/3D PRINTING WEBINARS
Metal Additive Manufacturing Analysis Webinar
In this webinar we introduce Metal Based Additive Manufacturing Analysis to understand and evaluate many aspects of the metallurgy.
Polymer Additive Manufacturing Analysis Webinar
In this webinar we introduce Polymer Additive Manufacturing analysis that prevents defects in 3D-printed objects
Quality of Metal Powder Feedstocks for AM Webinar
In this webinar we introduce Multiscale Assessment on the Quality of Metal Powder Feedstocks for Additive Manufacturing
BATTERY ANALYSIS WEBINARS
Application of Electron Microscopy to Lithium Ion Batteries Webinar
In this webinar we introduce the application of Electron Microscopy to Lithium Ion Batteries from Micron to Atomic Level
Chemical Analysis of Energy Storage Devices Webinar
In this webinar we introduce full Survey Chemical Analysis of Materials Used in Energy Storage Devices such as lithium ion batteries
Multiscale investigations of Lithium Ion Battery Webinar
In this webinar we introduce analytical techniques for the characterization of Li-ion battery electrode (cathode) at different length scale
MATERIALS ANALYSIS WEBINARS
Advanced Microscopy of Compound Semiconductors
In this webinar, we will explore the variety of microscopy techniques available at Eurofins EAG commonly utilized to characterize compound semiconductor materials.
Analyses of Modified Glass Surfaces Webinar
In the full webinar we will focus on analyses of modified glass surfaces and thin coatings using Secondary Ion Mass Spectrometry (SIMS).
Analysis of GaAs pHEMT & GaN HEMT Webinar
In the full webinar we will focus on the PCOR-SIMS Analysis of GaAs pHEMT and GaN HEMT using Secondary Ion Mass Spectrometry
Analytical Approaches for Food & Beverage Webinar
In this webinar we introduce the analytical approaches for solving food and beverage challenges including contamination.
Analytical Investigations of Plastics & Polymers Webinar
In this webinar we introduce Analytical Investigations of Plastics and Polymers to tackle failure issues quickly and effectively
Analyzing Vertical Cavity Surface Emitting Lasers Webinar
In the full webinar we will introduce analyzing VCSELs with a focus on secondary ion mass spectrometry (SIMS)
Ask The Expert – All About SIMS Webinar
In the full webinar we answer pre-submitted questions from our audience about Secondary Ion Mass Spectrometry
Ask the Expert: Composition and Contaminant Measurements of Solid State Materials
During this live Ask the Expert event, we will answer pre-submitted questions from our audience regarding materials analysis with various X-ray and ion beam analytical techniques.
Ask the Expert: Polymeric Material Investigations
During this live Ask the Expert event, we will answer pre-submitted questions from our audience regarding characterization of polymeric materials used for product development, R&D, and failure analysis.
Ask the Expert: Residual Gas Analysis
RGA is ideally suited for process development, sealing quality control, studying long-term outgassing of the enclosed materials inside the components, and for product qualification.
Ask the Expert: Surface Contact and Optical Metrology
During this live Ask the Expert event, we will answer pre-submitted questions from our audience regarding materials analysis with various surface contact and optical analytical techniques.
Ask the Expert: X-ray Diffraction (XRD)
X-ray diffraction (XRD) is a powerful and versatile technique that can give detailed structural information about almost anything that is solid.
Ask the Experts: Auger, TOF-SIMS, XPS
Surface chemistry affects multiple properties including adhesion, wettability, appearance and cleanliness. Auger, TOF-SIMS and XPS are often used to understand chemistry in the top few nanometers of a sample surface.
Ask the Experts: Materials Characterization of GaN Power Transistors
Demand for compound semiconductors has rapidly grown recently. During this live event we answered questions surrounding the Materials Characterization of GaN HEMT power transistors.
Ask the Experts: Vibrational Spectroscopy for Materials Analysis
FTIR, Raman and NanoIR are particularly well suited at determining the identity and molecular structure of organic materials, however they can also obtain some inorganic information too.
Characterization & Failure Analysis of Optoelectronics Webinar
In the full webinar we introduce Characterization and Failure Analysis of Optoelectronic Materials and Devices
Characterization of Plasma Altered Polymer Surfaces Webinar
In the full webinar we will discuss how the surface properties of polymers are altered by plasma treatment using characterization techniques
Chemical Analysis of Plasma Resistant Ceramic Coatings Webinar
In the full webinar we will focus Full Survey Chemical Analysis of
Plasma Resistant Ceramic Coatings using GDMS
Coffee & Conversations: Contamination Measurements
November 2, 2023
Please join us for coffee and conversations! Enjoy a cup of coffee and pastries as you get to know our technical experts.
Coffee & Conversations: Materials Identification
February 15, 2024
Please join us for coffee and conversations! Enjoy a cup of coffee and pastries as you get to know our technical experts.
Coffee and Conversations – Thin Film Characterization
May 15, 2024
Please join us for coffee and conversations! Enjoy a cup of coffee and pastries as you get to know our technical experts.
Corrosion Testing for Medical Devices
This webinar covers FDA regulation of medical devices, the most commonly used test standards, and custom testing at Eurofins EAG Laboratories.
EAG Analytical Capabilities in Europe Webinar
In this webinar we introduce EAG Analytical Capabilities in Europe at our Eindhoven and Toulouse Laboratories
Environmental chamber clean analysis Webinar
In this webinar we introduce Environmental chamber clean analysis that identifies contamination that can ruin your qualifications.
Extractable & Leachable Studies for Consumer Products Webinar
In this webinar we introduce Extractable and Leachable tests which identify chemical components that can migrate out of a product.
Glass Analysis Webinar
In the full webinar we will focus on Glass Analysis looking at Chemical and Physical Measurements to address manufacturing issues
Material Reliability & Characterization in Europe Webinar
In this webinar we introduce Accelerated Life Testing and Failure Analysis techniques at EAG Laboratories Eindhoven
MicroLED Analysis Webinar
In the full webinar we introduce MicroLED Analysis for improved understanding of III-nitride material properties and growth/device processes
Particle Characterization Webinar
In this webinar we introduce Particle Characterization by analyzing and reducing particulate matter and contamination
Stability Programs for Leachable Impurities Webinar
In this webinar we introduce Leachables stability studies and will cover impurities, method and stability requirements.
Thin Film Analysis Webinar
In the full webinar we will discuss Thin Film Analysis that looks at film composition, thickness, and uniformity.
Will the Newest Wearable Device Leave You Itching for More Webinar
In this webinar we introduce evaluating wearable safety including product recall, lawsuits, and regulatory agency inquiries.
MEDICAL & PHARMACEUTICAL WEBINARS
Advances in Materials Characterization of Medical Device Webinar
In this webinar we introduce EAG Laboratories advances in Materials and Surfaces Characterization of Medical Devices
Are You Prepared for the New EU Medical Device Regulation Webinar?
In this webinar we introduce how a 3rd Party Analytical Lab Can Help Support Your Company’s Compliance with EU’s MDR
Characterization of Bioceramics for Surgical Implants Webinar
In this webinar we introduce Characterization of Bioceramics for Surgical Implants using analytical tools for full qualification
Chemical Compatibility of Polymers in Medical Devices Webinar
In this webinar we introduce Chemical Compatibility of Polymers in Medical Devices and prevent material problems in the field
Deformulation of Pharmaceuticals Webinar
In this webinar we introduce Deformulation of Pharmaceutical RLDs and understanding the Q1/Q2 Sameness Requirements for Complex Generics
Design an Effective Chemical Characterization Study for Your Device
May 15, 2024
Join us for this live online symposium presented by EAG Laboratories and Exponent!
Master the Toxicological Risk Assessment of Your Device with Better Chemistry
Tuesday, December 12, 2023
Join us for this live online symposium presented by EAG Laboratories and Gradient!
MICROELECTRONICS TEST & ENGINEERING WEBINARS
Ask the Expert: ATE Testing
ATE testing automates and streamlines the testing process of microelectronic devices by using specialized hardware and software to perform a wide range of functional tests under various conditions. Come learn more about ATE and what EAG can do for you.
Ask the Expert: ESD
Damage caused by ESD is one of the primary failure mechanisms for integrated circuits. Testing susceptibility to ESD events is crucial in the success of electronic devices and is essential for the qualification process.
Ask the Expert: Failure Analysis of Electronic Devices
FA plays a critical role in product development and improvement. During this live Ask the Expert event, we will answer pre-submitted questions from our audience about electronic device failure analysis.
Component Product Qualification Webinar
In this webinar we introduce Microelectronic Component Product Qualification to understand and consider component reliability.
Dye & Pry Webinar
In this webinar we introduce Dye and Pry that involves cleaning a sample to remove debris & flux around solder, then exposing it to a red dye.
Electronic Device Failure Analysis Webinar
In this webinar we introduce failure analysis of ICs and other components in the product development cycle and for improving current products
ESD Webinar
In this webinar we introduce electrostatic discharge (ESD) testing which is one of the failure mechanisms for integrated circuit parts
Failure Analysis in a Complex World Webinar
In this webinar we show how EAG troubleshoots electronic system failures using a multidisciplinary approach
Failure Analysis of Reliability Webinar
In this webinar we introduce The Failure Analysis of Reliability Testing Samples as applied electronic and semiconductor devices
FIB Circuit Edit Webinar
In this webinar we introduce FIB Circuit Edit which allows the cutting of connections and placement of new lines in a semiconductor die
Latch-up Testing Webinar
In this webinar we introduce latch-up testing which is relevant for CMOS devices with high static power dissipation.
Testing of High Speed I/O Webinar
In this webinar we introduce the Testing of High Speed I/O to validate the devices from characterization to production
Warpage Analysis Webinar
In this webinar we introduce Warpage and Strain Characterization used for non-contact, full-field acquisition of 3D topographies.