FIB Circuit Edit Webinar
In this webinar we introduce FIB Circuit Edit which allows the cutting of connections and placement of new lines in a semiconductor die
Polymer Case Study: Environmental Stress Cracking of a Polycarbonate Part
Conveyor devices transport goods from one location to another while minimizing error, lowering risk, and reducing physical strain and labor costs. They can be used in grocery stores, for moving walkways and to transport heavy or bulking items.
Case Study
A company was investigating a rise in cracking of polycarbonate (PC) components used in a conveyor device that was frequently sanitized with disinfectants. The components were reportedly exposed to a disinfectant product containing quaternary ammonium compounds, which have been known to cause environmental stress cracking (ESC) of polycarbonate materials under certain conditions.
Analysis
Fractography was performed on the failed components to assess the failure mode based on the crack morphology and fracture surface features. The components were severely embrittled and the fracture surface features were consistent with ESC. Additionally, the components were extracted with a solvent and screened by LC-MS for non-volatile organic compounds.
Result
Based on the mass spectral signal, ions consistent with a benzyl quaternary ammonium compound were detected, confirming PC components were in contact with a known stress cracking agent.
Failure Analysis of Polymers
For more than 50 years, scientists and engineers at Eurofins EAG have investigated and resolved product failures for clients. Our team of experts identify key failure indicators and follow them to the root cause.
Polymeric Materials Evaluated at EAG
Failure analysis of plastics, thermosets, and rubber materials is commonly performed on finished products and typically involve comparative analysis between failed and non-failed samples. Once the potential root cause is identified, experiments can be designed and conducted to test the hypothesis and recreate the failure in the laboratory. Eurofins EAG can evaluate a variety of polymer types, including:
- Raw materials in polymer formulations
- Adhesives (heat/moisture/UV-cured, silicones, epoxies, acrylates)
- Coatings (functional or decorative)
- Thermoplastics, thermosets, thermoplastic elastomers, composites
- Molded, extruded, cast components
Eurofins EAG Laboratories offers a full suite of analytical techniques to evaluate the identity, composition, morphology, topography, and rheology of polymeric materials and components.
- Chromatography: GC, GC-MS, HPLC, IC, LC-MS, Pyrolysis GC-MS, HS/TD/SPME GC-MS
- Inorganic Identification and Quantification: ICP-MS, ICP-OES, SEM-EDS, XRD, XRF
- Physical Testing: Contact Angle, Mechanical Testing, Rheometry, Viscometry
- Spectroscopy: Ellipsometry, FTIR, NIR, NMR, Raman, UV-Vis
- Surface Analysis: Auger, SEM, TOF-SIMS, XPS
- Surface Metrology: AFM, Nanoindentation, Profilometry
- Thermal Analysis: DMA, DSC, RGA, TGA, TGA-IR, TGA-MS, TMA
Contact Our Team
Call +1 800-366-3867 or email us.
Related Resources
- Webinar: Analytical Investigations of Plastics and Polymers
- Webinar: Characterization of Plasma Altered Polymer Surfaces
- Application Note: XPS Analysis of Surface Modified Polymers
- Blog: Polymer Case Study: Incompatible Contaminant
- Blog: Polymer Case Study: Molded In Stresses
- Blog: Polymer Case Study: Off-Odor Memory Foam
- Blog: Polymer Case Study: Weathering Polymeric Films
- Blog: Polymer Case Study: Blistering Paint
- Blog: Polymer Case Study: Cracking of Molded Components
- Blog: Polymer Case Study: Curing Issues with Silicone Adhesive
- Blog: Polymer Case Study: Delamination of Food Packaging
- Service: Polymer Chemistry
- Technique: Smart Chart
- Industry: Chemical Testing
- Industry: Consumer Electronics Testing
- Industry: Medical Devices
- Brochure: Failure Analysis of Polymers
More content you might like...
Uniformity is Key in Epitaxial Growth
AC-STEM analysis can provide a visual representation of non-uniformities in an active region. Roughness can easily be observed within interfaces. EDS maps can then be used to corroborate the roughness in relation to composition.
Polymer Additive Manufacturing Analysis Webinar
In this webinar we introduce Polymer Additive Manufacturing analysis that prevents defects in 3D-printed objects
Cryo-FIB/SEM: Enhancing Precision and Minimizing Damage in Material Analysis
Cryogenic focused ion beam and scanning electron microscopy is a technique used to reduce damage caused by ion and electron beams.